Optimal Capacity Determination For Electrical Distribution Transformers Based On IEC 60076-7 And Practical Load Data

Full Text (PDF, 690KB), PP.1-11

Views: 0 Downloads: 0

Author(s)

Keyvan Farahzad 1 Aliakbar Shahbahrami 1 Mani Ashouri 2

1. Iranian Northern DSO, Nowshahr, Iran

2. Aalborg University, Aalborg, Denmark

* Corresponding author.

DOI: https://doi.org/10.5815/ijem.2020.01.01

Received: 24 Sep. 2019 / Revised: 1 Oct. 2019 / Accepted: 15 Oct. 2019 / Published: 8 Feb. 2020

Index Terms

Distribution Transformer, IEC 60076-7, Capacity Determination, DSO, Practical Load

Abstract

Optimal installation of electrical distribution transformers has always been a challenging task for distribution operator (DSO)s due to load variations, particularly for seasonal loads. Depending on the quality of distribution systems in different regions and countries, a considerable number of installed transformers may be oversized or have capacity lower than critical standard. In this study, IEC 60076-7 is used to calculate the temperature limitations for distribution transformer capacities and determine optimal transformer capacity for an electrical distribution substation based on the critical values and limitations given in the standard. A data logger is installed on the substation and the load data is recorded for one year. Additionally, the impact of different parameters like ambient temperature is investigated for optimal determination of transformer capacity.

Cite This Paper

Keyvan Farahzad, Aliakbar Shahbahrami, Mani Ashouri. “Optimal Capacity Determination For Electrical Distribution Transformers Based On IEC 60076-7 And Practical Load Data", International Journal of Engineering and Manufacturing(IJEM), Vol.10, No.1, pp.1-11, 2020. DOI: 10.5815/ijem.2020.01.01

Reference

[1] S. Wang, “Study on the selection method of economical capacity for MV transformers,” in 2012 China International Conference on Electricity Distribution, 2012, pp. 1–5.

[2] A. Izanlo, S. A. Gholamian, and M. V. Kazemi, “Using of four-switch three-phase converter in the structure DPC of DFIG under unbalanced grid voltage condition,” Electr. Eng., vol. 100, no. 3, pp. 1925–1938, 2018.

[3] A. Izanlo, S. Asghar Gholamian, and M. V. Kazemi, “Comparative study between two sensorless methods for direct power control of doubly fed induction generator,” Rev. Roum. des Sci. Tech. Ser. Electrotech. Energ., vol. 62, no. 4, pp. 358–364, 2017.

[4] M. Verij Kazemi, S. A. Gholamian, and J. Sadati, “Adaptive frequency control with variable speed wind turbines using data-driven method,” J. Renew. Sustain. Energy, vol. 11, no. 4, p. 043305, Jul. 2019.

[5] S. N. G. Gourisetti, H. Kirkham, and D. Sivaraman, “A review of transformer aging and control strategies,” in 2017 North American Power Symposium (NAPS), 2017, pp. 1–6.

[6] M. Ashouri and S. Mehdi Hosseini, “Application of Krill Herd and Water Cycle Algorithms on Dynamic Economic Load Dispatch Problem,” Int. J. Inf. Eng. Electron. Bus., vol. 6, no. 4, pp. 12–19, Aug. 2014.

[7] Y. Najafi Sarem, J. Poshtan, M. Ghomi, and M. Poshtan, “Synchronous generator parameters estimation,” in 2007 International Conference on Intelligent and Advanced Systems, 2007, pp. 870–875.

[8] B. Shakerighadi, A. Anvari-Moghaddam, E. Ebrahimzadeh, F. Blaabjerg, and C. L. Bak, “A Hierarchical Game Theoretical Approach for Energy Management of Electric Vehicles and Charging Stations in Smart Grids,” IEEE Access, vol. 6, pp. 67223–67234, 2018.

[9] S. Bahramara and F. G. Mohammadi, “Optimal sizing of distribution network transformers considering power quality problems of non-linear loads,” CIRED - Open Access Proc. J., vol. 2017, no. 1, pp. 2471–2475, 2017.

[10] Z. Q. Liang and Y. Q. Yang, “The Energy Saving Research of the On-Load Capacity Regulating Transformer in Practical Applications,” Adv. Mater. Res., vol. 962–965, pp. 1504–1508, Jun. 2014.

[11] C. International and E. Commission, “IEC 60076-7 International Standard- Loading guide for mineral-oil-immersed power transformers,” 2018.

[12] M. Ashouri, H. Khazraj, F. F. da Silva, and C. Leth Bak, “Protection of Multi-Terminal VSC-HVDC Grids Based on the Response of the First Carrier Frequency Harmonic Current,” in 2018 53rd International Universities Power Engineering Conference (UPEC), 2018, pp. 1–5.

[13] M. Ashouri, C. L. Bak, and F. Faria Da Silva, “A review of the protection algorithms for multi-terminal VCD-HVDC grids,” in 2018 IEEE International Conference on Industrial Technology (ICIT), 2018, pp. 1673–1678.

[14] Z. Y. Zheng et al., “A New Capacity Inspection Method for Distribution Transformer based on Big Data,” in 2018 China International Conference on Electricity Distribution (CICED), 2018, pp. 38–41.

[15] H. Jun, H. Junhui, G. Sanrong, T. Jian, and L. Hu, “Optimization and modeling of power supply capability in distribution system based on analyzing interconnections among main transformer,” in 2016 China International Conference on Electricity Distribution (CICED), 2016, pp. 1–5.