Yoseph Mekonnen Abebea; P. Mallikarjuna Rao; M. Gopichand Nak

Load Flow Analysis of a Power System Network in the Presence of Uncertainty using Complex Affine Arithmetic

Full Text (PDF, 473KB), PP.48-64

Views: 0 Downloads: 0

Author(s)

Yoseph Mekonnen Abebea ^1,* P. Mallikarjuna Rao ¹ M. Gopichand Nak ¹

1. Dept. of Electrical Eng., College of Engineering (A), Andhra University, Visakhapatnam-530003, India

* Corresponding author.

DOI: https://doi.org/10.5815/ijem.2017.05.05

Received: 2 May 2017 / Revised: 12 May 2017 / Accepted: 17 May 2017 / Published: 8 Sep. 2017

Index Terms

Complex Affine Arithmetic, Monte Carlo Approach, Transmission Line, Renewable Energy Sources, Uncertainty

Abstract

The depletion of fossil fuel is driving the world towards the application of renewable energy sources. However, their intermittent nature, in addition to load variation and transmission line sag-tension change due to temperature, is a great deal of problems for reliable power delivery. Without a reliable power delivery, power generation is just a waste of resources. A reliable power delivery can be achieved when the best and the worst case steady state information of a power system network is known to plan and control accordingly. If a system is affected by the presence of uncertainty, a deterministic load flow analysis fails to provide the worst-case load flow result in a single analysis. As a result, a load flow analysis considering the presence of uncertainty is mandatory. On this paper, a novel complex affine arithmetic (AA) based load flow analysis in the presence of generation and load uncertainties is proposed. The proposed approach is tested on an IEEE bus systems and compared with Monte Carlo approach. The proposed approach convergence faster than the Monte Carlo based method and it is slightly conservative.

Cite This Paper

Yoseph Mekonnen Abebe, P. Mallikarjuna Rao, M. Gopichand Nak,"Load Flow Analysis of a Power System Network in the Presence of Uncertainty using Complex Affine Arithmetic", International Journal of Engineering and Manufacturing(IJEM), Vol.7, No.5, pp.48-64, 2017. DOI: 10.5815/ijem.2017.05.05

Reference

[1]H. Bevrani, A. Ghosh and G. Ledwich, “Renewable energy sources and frequency regulation: survey and new perspectives”, IET Renew. Power Gener. IET Renewable Power Generation, vol. 4 no. 5,pp. 438 – 457, 2010.

[2]K. Tanaka, K. Uchida, K. Ogimi, T. Goya, A. Yona, T. Senjyu, T. Funabashi, and C.-H. Kim, “Optimal Operation by Controllable Loads Based on Smart Grid Topology Considering Insolation Forecasted Error”, IEEE Trans. Smart Grid IEEE Transactions on Smart Grid, vol. 2, no. 3, pp. 438–444, 2011.

[3]A. Sobu and G. Wu, “Optimal operation planning method for isolated micro grid considering uncertainties of renewable power generations and load demand”, In: proc, IEEE PES Innovative Smart Grid Technologies, pp. 1-6, 2012.

[4]K. D. Vos, J. Morbee, J. Driesen, and R. Belmans, “Impact of wind power on sizing and allocation of reserve requirements,” IET Renewable Power Generation, vol. 7, no. 1, pp. 1–9, 2013.

[5]Yixun Shi, “A Probability Model for Occurrences of Large Forest Fires”, International Journal of Engineering and Manufacturing (IJEM), vol. 1, no. 1, pp. 1-7, 2012.

[6]Basheer M, Al-Maqaleh, Abduhakeem A, Al-Mansoub, Fuad N and Al-Badani, “Forecasting using Artificial Neural Network and Statistic Models”, International Journal of Engineering and Manufacturing (IJEM), vol. 6, no. 3, pp. 20-32, 2016.

[7]G. Capizzi, F. Bonanno, and C. Napoli, “Recurrent neural network-based control strategy for battery energy storage in generation systems with intermittent renewable energy sources”, In: proc, 2011 International Conference on Clean Electrical Power (ICCEP), 2011. pp. 336-340, 2011.

[8]L. Gela?anskas, A. Baranauskas, K. A .A Gamage and and M. A?ubalis “Hybrid wind power balance control strategy using thermal power, hydro power and flow batteries, “International Journal of Electrical Power & Energy Systems”, vol 74, pp.310-321, 2016.

[9]A. Lucas and S. Chondrogiannis, “Smart grid energy storage controller for frequency regulation and peak shaving, using a vanadium redox flow battery”, International Journal of Electrical Power & Energy Systems, vol 80, pp.26-36, 2016.

[10]A. Dimitrovski, K. Tomsovic, A. Vaccaro, “Reliable Algorithms for Power Flow Analysis in the Presence of data Uncertainties”, In proc, Innovations in Power Systems Reliability pp. 329-357. Springer London., 2011.

[11]Z. Wang and F.L. Alvarado, “Interval Arithmetic in Power Flow Analysis”, IEEE transaction on Power System., vol. 7, no. 3, pp. 1341-1349, 1992.

[12]M. Marin, D. Defour, and F. Milano, “Power Flow Analysis under Uncertainty uses Symmetric Fuzzy Arithmetic”, In: Proc, PES General Meeting| Conference & Exposition, pp. 1-5, Jul. 2014.

[13]A. Vaccaro, C. A. Cańizares, and D. Villacci, “An Affine Arithmetic-Based Methodology for Reliable Power Flow Analysis in the Presence of Data Uncertainty”, IEEE Transaction on Power System, vol. 25, no. 2, pp. 624-632, 2010.

[14]M. Pirnia, C. A. Canizares, K. Bhattacharya, and A. Vaccaro, “A Novel Affine Arithmetic Method to Solve Optimal Power Flow Problems With Uncertainties”, IEEE Trans. Power Syst. IEEE Transactions on Power Systems, vol. 29, no. 6, pp. 2775–2783, 2014.

[15]L. H. De Figueiredo, and J. Stolfi, “Affine Arithmetic: concepts and applications”, Kluwer Academic Publisher Netherlands, vol. 37, pp. 147–158, 2004.

[16]W. Heindrich, P. Slusallek, H. P. Seidel, “Sampling Procedural Shaders Using Affine Arithmetic”, ACM Transactions on Graphics (TOG), vol. 17, no. 3, pp. 158-176, 1998.

[17]J.Stolfi, L.H De Figueiredo, “An Introduction to Affine Arithmetic”, Trends in Applied and Computational Mathematics., vol. 4, no. 3, pp. 297-312, 2003.

[18]N. Fermia and G. Spagnuolo, “True Worst-Case Circuit Tolerance Analysis Using Genetic Algorithms and Affine Arithmetic”, IEEE Transaction on Circuits and Systems Fundamental Theory and Applications, vol. 47, no. 9, pp. 1285-1296, 2000.

[19]J. Muńoz, C. Cańizares, K. Bhattacharya, A. Vaccaro, “Affine Arithmetic Based Method for Voltage Stability Assessment of Power Systems with Intermittent Generation Sources”, IEEE Transaction on Power System, vol. 28, no. 4, pp. 4475-4487, 2013.

[20]F. Messine and A. Touhami, “A General Reliable Quadratic Form: An Extension of Affine Arithmetic”, Reliab. Comput., vol. 12, no. 3, pp. 171–192, 2006.

[21]G. Manson, “Calculating frequency response functions for uncertain systems using complex affine analysis”, J. Sound Vib., vol. 288, no. 3, pp. 487–521, 2005.

[22]Y. M. Abebe, M. R. Pasumarthi, and G. N. Mudavath, “Load Flow Analysis of Uncertain Power System Through Affine Arithmetic”, In Microelectronics, Electromagnetics and Telecommunications, vol. 372, S. C. Satapathy, N. B. Rao, S. S. Kumar, C. D. Raj, V. M. Rao, and G. V. K. Sarma, Eds. New Delhi: Springer India, 2016, pp. 217–231.

[23]W. Gu, L. Luo, T. Ding, X. Meng, and W. Sheng, “An affine arithmetic-based algorithm for radial distribution system power flow with uncertainties”, Int. J. Electr. Power Energy Syst., vol. 58, pp. 242–245, 2014.

[24]A. Vaccaro, C. A. Canizares, and K. Bhattacharya, “A Range Arithmetic-Based Optimization Model for Power Flow Analysis Under Interval Uncertainty”, IEEE Trans. Power Syst., vol. 28, no. 2, pp. 1179–1186, 2013.

[25]H. Glavitsch and R. Bacher, “Optimal power flow algorithms”, Anal. Control Syst. Tech. Electr. Power Syst., vol. 41, 1991.

[26]S. Mallick, D. V. Rajan, S. S. Thakur, P. Acharjee, and S. P. Ghoshal, “Development of a new algorithm for power flow analysis”, Int. J. Electr. Power Energy Syst., vol. 33, no. 8, pp. 1479–1488, 2011

International Journal of Engineering and Manufacturing (IJEM)