The Estimation and Experiment of Axial Force in Deep Well Pump Basing on Numerical Simulation

Full Text (PDF, 547KB), PP.53-61

Views: 0 Downloads: 0

Author(s)

SHI Wei-dong 1,* WANG Hong-liang 1 ZHOU Ling 1 ZOU Ping-ping 1 WANG Chuan 1

1. Technical and Research Center of Fluid Machinery Engineering Jiangsu University,Jiangsu,China

* Corresponding author.

DOI: https://doi.org/10.5815/ijmecs.2010.02.08

Received: 15 Aug. 2010 / Revised: 16 Sep. 2010 / Accepted: 6 Nov. 2010 / Published: 8 Dec. 2010

Index Terms

Deep well pumps, axial force, numerical simulation, accuracy

Abstract

An axial force estimation is a crucial problem in the design of a deep well pump. According to the cost of time and financial resources by experimental measurement and low precision and applicability of using experiential formulas, the effects of solid modeling, mesh generation, residual convergence precision, turbulence model and numerical solutions on the accuracy of numerical simulation were investigated. And the best scheme was applied in the numerical simulation to predict the axial thrust of the deep well pump. The simulation values of axial force are in agreement with the testing values, and the maximum error is less than 10%.

Cite This Paper

SHI Wei-dong, WANG Hong-liang, ZHOU Ling, ZOU Ping-ping, WANG Chuan, "The Estimation and Experiment of Axial Force in Deep Well Pump Basing on Numerical Simulation", International Journal of Modern Education and Computer Science(IJMECS), vol.2, no.2, pp.53-61, 2010. DOI:10.5815/ijmecs.2010.02.08

Reference

[1]Zhang Guofu, Cheng Hongxun, Guo Jiahong, “Numerical solution of axial thrust of mixed-flow pump,”, Chinese, vol. 37, pp.51-55,July 2001.
[2]Li Long; Wang Ze, “Simulation of the influence of wall roughness on the performance of axial-flow pumps,” Transactions of the Chinese Society of Agricultural Engineering, Chinese, vol. 20, pp.132-134, January 2004.
[3]SHI Wei-dong; ZHANG Qi-hua; LU Wei-gang, “Hydraulic design of new-type deep well pump and its flow calculation,” Journal of Jiangsu University(Natural Science Edition), Chinese, vol. 27, pp.528-531, June 2006.
[4]ZHANG Qi-hua; SHI Wei-dong; LU Weigang; XU Jian-qiang, “Numerical calculation of axial force and balancing on newtype deep well pump,” Journal of Drainage and Irrigation Machinery Engineering ,Chinese, vol. 25, pp.7-10, June 2007.
[5]Zhao Binjuan; Yuan Shouqi; Li Hong; Tan Minggao, “3D numerical simulation and performance prediction of double-suction impeller,” Transactions of the Chinese Society of Agricultural Engineering ,Chinese, vol. 22, pp.93-96, January 2006
[6]Wang Fujun, “Application of CFD to turbulent flow analysis and performance prediction in hydraulic machinery,”Journal of China Agricultural University, Chinese, vol. 10, pp.75-80, April 2005.