Distribution System Planning With Distributed Generations Considering Benefits and Costs

Full Text (PDF, 195KB), PP.45-52

Views: 0 Downloads: 0

Author(s)

Saeid Soudi 1,*

1. Department of Electrical Engineering , Kish International Branch, Islamic Azad University, Kish Island, Iran

* Corresponding author.

DOI: https://doi.org/10.5815/ijmecs.2013.09.07

Received: 28 Apr. 2013 / Revised: 25 Jun. 2013 / Accepted: 10 Aug. 2013 / Published: 8 Sep. 2013

Index Terms

Distributed Generation, Distribution Systems, Particle Swarm Optimization, Reliability.

Abstract

One of the methods used in the design and utilization of distribution systems to improve power quality and reliability of load power supply of consumers, is the application of distributed generation (DG) sources. In this paper, a new method is proposed for the design and utilization of distribution networks with DG resources application by finding the optimal sitting and sizing of generated power of DG with the aim of maximization of its benefits to costs. The benefits for DG are considered as system losses reduction, system reliability improvement and benefits from the sale electricity or from lack of purchase of electricity from the main system. The costs of DG are considered as initial capital, maintenance and operation cost and investment cost. In this paper to solve the optimal sitting and sizing problem a Modified particle swarm optimization (PSO) is applied. Simulations are presented on a 69-bus test distribution system to verify the effectiveness of the proposed method. Results showed that the proposed high-power method to find the optimal points of problem is faster and application of DG resources reduced the losses, costs and improved the system voltage profile.

Cite This Paper

Saeid Soudi, "Distribution System Planning With Distributed Generations Considering Benefits and Costs", International Journal of Modern Education and Computer Science (IJMECS), vol.5, no.9, pp.45-52, 2013. DOI:10.5815/ijmecs.2013.09.07

Reference

[1]Lei Han ; Renjun Zhou ; Xuehua Deng, “An analytical method for DG placements considering reliability improvements ”, IEEE Power & Energy Society General Meeting, PES '09, pp.1-5, 2009..
[2]M. F.Shaaban, and E. F. El-Saadany, “Optimal allocation of renewable DG for reliability improvement and losses reduction”, IEEE Power and Energy Society General Meeting, PP. 1-8, 2012
[3]Duong Quoc Hung ; N. Mithulananthan, “Multiple Distributed Generator Placement in Primary Distribution Networks for Loss Reduction”, IEEE Transactions on Industrial Electronics, Vol. 60, No. 4, pp. 1700-1708, 2013.
[4]M.M. Aman, G.B. Jasmon, H. Mokhlis, A.H.A. Bakar, “Optimal placement and sizing of a DG based on a new power stability index and line losses”, International Journal of Electrical Power & Energy Systems, Vol. 43, No. 1, pp. 1296-1304, December 2012.
[5]In-Su Bae ; Jin-O Kim ; Jae-Chul Kim ; C.Singh, “Optimal operating strategy for distributed generation considering hourly reliability worth”, IEEE Transactions on Power Systems, Vol. 19, No. 1, pp. 287-292, 2004.
[6]L. R. Mattison, "Technical Analysis of the Potential for Combined Heat and Power in Massachusetts", Report, University of Massachusetts Amherst, May 2006.
[7]Devender Singh, R. K. Misra, and Deependra Singh "Effect of load models in Distributed Generation planning," IEEE Transaction on Power systems, Vol. 22, no. 4, Nov. 2007
[8]N. Khalesi, N. Rezaei, M.-R. Haghifam, “DG allocation with application of dynamic programming for loss reduction and reliability improvement”, International Journal of Electrical Power & Energy Systems, Vol. 33, No. 2, pp. 288-295, February 2011.
[9]Carmen L.T. Borges, Djalma M. Falca˜o, “Optimal distributed generation allocation for reliability, losses, and voltage improvement”, International Journal of Electrical Power & Energy Systems, Vol. 28,No. 6, pp. 413-420, July 2006.
[10]S.C. Reddy, P.V.N. Prasad, A.J. Laxmi, “Reliability improvement of distribution system by optimal placement of DGs using PSO and neural network”, International Conference on Computing, Electronics and Electrical Technologies (ICCEET), pp. 156-162, 2012.
[11]R.V. Rao, V.J. Savsani, , D.P. Vakharia, “Teaching–learning-based optimiza- tion: an optimization method for continuous non-linear large scale problem”, Inf. Sci. 183, 1–15, 2012.
[12]R.V. Rao, V. Patel, “An elitist teaching–learning-based optimization algo- rithm for solving complex constrained optimization problems” Int. J. Ind. Eng.Comput., 3, http://dx.doi.org/10.5267/j.ijiec.03.007, 2012.
[13]Haupt R. L. and Haupt S. E., PrACtical genetic algorithms. Second Edition, John Wiley & Sons Inc. Publication, 2004, pp. 189-190.
[14]M. Clerc. Particle Swarm Optimizition. ISTE,2006.
[15]E.N. Avadani, B. Moradzadeh, M. Abedi, S.H. Hosseinian, “Multiobjective Optimization for Optimal Power Flow Considering Valve Loading Effect”, UPEC Conf.
[16]Shyh-Jier Huang, “An Immune-Based Optimization Method to Capacitor Placement in a Radial Distribution System”, IEEE Trans. On Power Delivery, Vol. 15, No. 2, pp. 744-749, 2000
[17]M. E. Baran and F. F. Wu, “Optimal Capacitor Placement on Radial Distribution Systems,” IEEE Transactions on Power Delivery, vol. 4, no. 1, pp. 725–734, January 198.